Ground Fire Monitor 750 GPM

Ground Fire Monitor 750 GPM
Brand: AWG Fittings GmbH

Specification

  • The APF 3-P is designed as ground fire monitor 750 gpm for mobile use.
  • The device equipped with nozzle or foam pipe is suitable for delivering water and any type of foam.
  • The monitor resilient supporting legs have low-wear carbide stand tips and collapse for transport in just one action.
  • Vertical adjustment is carried out via a self-locking spindle with hand wheel.
  • Moreover, a built-in swivel range limit ensures stability at all times of use.
  • The top and bottom sections of the monitor can be quickly and simply separated from each other without tools.
  • On the one hand, this provides convenient handling combined with handles integrated in the top and bottom section.
  • On the other hand, the modular design allows the use of the top section as a roof monitor by mounting it onto a suitable folding joint or roof flange.
  • Horizontal adjustment with handle and vertical adjustment with hand wheel
  • Swivelling range Horizontal: ±180°, Vertical: 35° to 90° (released -15° up to +90°)
  • Flow rate 3000 l/min at 8 bar.
  • Input collecting breeching with 2x 2.5 inch, adapters coupling connection on request.
  • Outlet MZS 3000 nozzles complete with pick-up hoses for foam liquids, manual change between full jet and spray jet with integrated self priming for foam agents, a foam mixing rate is possible 1%, 3% and 6%.
  • Maximum pressure 16 bar
  • Made of aluminium anodized.
  • Paint finish, red (RAL 3000).

 

Portable Ground Fire Monitor 750 GPM APF 3-P
Ground Fire Monitor 750 GPM
Foam mixing rate
Foam mixing rate
Pressure Gauge
Pressure Gauge

 

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [416.95 KB]

Suction Strainers

SUCTION STRAINERS
Brand: AWG Fittings GmbH

Specification

  • Suction strainer with non-return valve and drain arrangement.
  • We recommend generally suction strainer with non-return valve and drain arrangement in order to prevent discountinuities in the liquid column when the suction process is interrupted and makes it possible to fill the suction pipe run.
  • Pulling the rope of the drain arrangement causes the check valve to open and to drain the suction hose.
  • Make a low maintenance fire pump priming system if it is installed at the end of the fire pump suction hose.
  • Body suction strainers made of aluminium alloy and strainer with stainless steel.

 

AWG suction strainers storz with foot valve

AWG suction strainers BSRT with non-return valve

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [136.02 KB]

Divider

DIVIDER with Screw Down Valves
Brand: AWG Fittings GmbH

Specification

  • Divider are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction.
  • Each hose line can be shut-off individually by means of a stop valve.
  • The stop valve of the dividers must be according to DIN 14365 easily operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
  • Allows smooth opening and closing and can be used as a regulating element.
  • Body made of aluminium alloy
  • Bonnets made of aluminium alloy, spindle and disc made of brass.
  • Inlet-outlet without caps and chain.
  • Coupling connection on customer request.

 

DIVIDER with Screw-Down Valves – 2 Outlets

AWG dividers screwdown valve 2 outlets

AWG divider screwdown vlv instantaneous

 

DIVIDER with Screw-Down Valves – 3 Outlets

AWG dividers screwdown valve 3 outlets
AWG dividers screwdown valve 3 outlets

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [150.15 KB]

 

DIVIDERS with Ball Valves
Brand: AWG Fittings GmbH

Specification

  • They have a straight free-flow waterway, very low friction loss and easy and quick controllability.
  • This dividers is a fire mobile equipment and cannot be used direct on the pressure outlet of a pump, must be used a hoses have a length of minimum 15 meter in front of the dividers.
  • Body dividers made of aluminium alloy and ball in polyamide.
  • Inlet-outlet without caps and chain
  • Coupling connection on customer request.

 

DIVIDERS with Ball Valves – 2 Outlets

AWG dividers storz connection

AWG dividers instantaneous

 

DIVIDERS with Ball Valves – 3 Outlets

Dividers with ball valve - 3 outlets

Divider with ball valve - 3 outlets

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [65.04 KB]

Water Shields

Water Shields
Brand: AWG Fittings GmbH

Specification

    • To build up large water veils or a water wall, to protect against gases, smoke, to cool objects.
    • In use the unit is firmly pressed to the ground by water pressure and is therefore working without manpower.
    • Several units can be linked up for wide water screen.
    • Made of aluminium alloy.
    • Size inlet 2.5″
    • Adapter coupling connection on request

     

    water shields
    Water Shield

     

    Water Shields Flowrate Option:

    water shields
    throw width (b) and throw height (h) water shield

     

    • Flow rate at 8 bar: 500 LPM, Throw width 24 meter, Throw height 7 meter
    • Flow rate at 8 bar: 800 LPM, Throw width 27 meter, Throw height 9 meter
    • Flow rate at 8 bar: 1400 LPM, Throw width 31 meter, Throw height 10 meter

     

    Aplication WaterShields

     

    Loader Loading...
    EAD Logo Taking too long?

    Reload Reload document
    | Open Open in new tab

    Download [113.20 KB]

Turbo Nozzle With Pistol Grip

Turbo Nozzle With Pistol Grip
Brand: AWG Fittings GmbH – Germany

Turbo nozzle with pistol grip
nozzle with pistol grip

 

Specification

  • The admissible working pressure for type 2475 of size 2 is PN16.
  • All types are equipped with swivelling adapters at the inlet.
  • Except as noted otherwise these adapters are made of aluminium.
  • The type 2475 is extremely light and handy due to handle and grip made of light and impact-resistant polyamide.
  • The indicated flow rates apply at an inlet pressure of 100 PSI.
  • Throw distance full jet: 25-31-38-44 m.
  • Throw distance spray jet: 10-13-17-19 m.
  • Flow range 115-230-360-475 LPM
  • Complete with turbo wheel and handle.

 


Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [46.43 KB]

Jet Spray Nozzles

Jet Spray Nozzles with Water Curtain
Brand: AWG Fittings GmbH

Specification

  • To protect fireman when holding the nozzles (branchpipes) against heat and smoke, a water curtain can be added to the full and spray jet.
  • The water curtain element is arranged annularly behind the nozzle. By means of an adjusting ring which can be turned easily, also under pressure, the outlet angle can be varied between 0° and 160°.
  • In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain.
  • Pipe, nozzle and tip made of aluminium alloy, ball in cold and impact resistant Polyamide.
  • The flow rate at 6 bar is 130-230 l/min depending on the diameter and jet of the nozzle tip. Flow rate with water curtain 290-400 l/min.
  • With spray angle of 15-20°, with water curtain up to 160°.
  • Except as noted otherwise the admissible working pressure is PN16 and adapters are made of aluminium.
  • Throw distance full jet: 27 m.
  • Throw distance spray jet: 13 m.

 

AWG jet/spray branchpipes with water curtain
jet spray nozzles

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [124.13 KB]

Foam Nozzles

Foam Nozzles
Brand: AWG Fittings GmbH

Specification

  • The air aspirating design makes the heavy foam nozzles suitable for use with all low expansion foam concentrates; protein, fluoroprotein, AFFF, and AR-AFFF.
  • The nozzle shall be constructed of light weight materials with pipe nozzle in stainless steel, protection ring and handle in rubber and ball valve shut-off in aluminium alloy.
  • Recommended working pressure at the inlet is 3-5 bar.
  • Nominal size: S2, S4, and S8 to be operated with AWG foam inductor Z2, Z4, and Z8.
  • Flow rate: 200 LPM (S2), 400 LPM (S4), and 800 LPM (S8) with pressure at the inlet is 5 bar.
  • Throw distance: approx. 23 m (S2), 26 m (S4), and 36 m (S8).
  • Size inlet: 2-1/2 inch
  • The connection type instantaneous coupling, Storz coupling or on customer’s request.
  • Can operates with fresh or sea water.

 

AWG foam nozzles
Low-expansion foam nozzle
AWG foam nozzles
Medium-expansion foam nozzle
AWG Foam Nozzles
Adjustable-expansion foam nozzles

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [259.78 KB]

Foam Inductors

FOAM INDUCTORS DIN 14384
Brand: AWG Fittings GmbH

Specification

  • “L”-type foam inductor are extremely lightweight and do not need a handle.
  • The foam inductor are designed to feed foam concentrates at a set mixing rate into the hose line.
  • Inductors are placed in the delivery line between the pump and the foam nozzle and can be used for medium- and also for heavy foam nozzles.
  • The injector system creates a vacuum in the body of the inductor and the foam concentrate is picked up via a suction hose ND 19 with a Storz 25-D coupling. At the foam inlet Storz 25-D adapters are generally mounted.
  • A mixing rate between 0% and 6% is possible.
  • Material foam inductor, body made of Polyoxymethylen (POM).
  • Nominal size: Z2, Z4, and Z8.
  • Flow rate at 8 bar: 200 LPM (Z2), 400 LPM (Z4), and 800 LPM (Z8).
  • When supply equipped with Pick-Up Hoses EN 16712-2, inlet: Ø 19, outlet Storz 25-D, inside Ø 19 mm, outside Ø 55 mm and length 1500 mm.
  • The connection type for inlet and outlet, Storz coupling, Instantaneous coupling or on customer’s request.

 

AWG Foam Inductors
Foam Inductors

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [119.00 KB]

Ground Fire Monitor 500 GPM

Ground Fire Monitor 500 GPM
Brand: AWG Fittings GmbH

Specification

  • The APF 2-TurboFighter, weighing approx. 10 kg, is a lightweight portable ground fire monitors, ideal device for mobile use.
  • Monitor type Alco Power Fighter APF 2-TurboFighter.
  • Swivelling range: Horizontal ±40° and Vertical +20° to +60°.
  • Both the vertical and horizontal swivelling directions can be locked in any position.
  • Horizontal adjustment with handle.
  • Vertical adjustment on nozzle.
  • TurboFighter supplied with an integrated ball valve for shutting off.
  • The special supporting legs provide stability in use and complete with safety rope.
  • Materials monitor body made of aluminium alloy, seals NBR and standard parts stainless steel.
  • Paint finish powder-coated, red (RAL 3000).
  • Maximum pressure: 16 bar.
  • Inlet: 2x 2.5 inch, adapters coupling connection on request.
  • Outlet: 2.5 inch complete with multi-purpose nozzles type MZ or MZV.
  • The MZ nozzles can set flow rate  500 GPM at 100 Psi (factory set for fixed flow).
  • The MZV nozzles flow rate is 2000 LPM at 8 bar, adjustable from 600-2000 LPM in steps of 200 each, change of jet shape and change of flow rate possible according to the preset pattern or continuously.
  • Multi-purpose nozzles (full jet/spray jet, wide spray approx. 100º) are equipped with a baffle which deflects the flow of extinguishing agent at the nozzle outlet so that it comes out through a ring-shaped slit.
  • Manual change between full and spray jet.
  • The nozzles made of aluminium alloy.
  • Compatible with foam concentrate.
  • Colour black anodized.
  • Throw distance (full jet position) with angle of approx. 25º to 30º at 8 bar operating pressure is approx. 50 meter.

 

 

AWG-Alco Ground Fire Monitor 500 GPM
Ground Fire Monitor 500 GPM

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [655.88 KB]

Portable Water Foam Fire Monitor

Portable Water Foam Fire Monitor for mobile use
Brand: AWG Fittings GmbH

Specification

  • Flow rate 1200 l/min at 8 bar.
  • Outlet Multi-purpose nozzle MZ 1200 or self-priming foam pipe SW12/S
  • Maximum pressure 10 bar
  • Swivelling range Horizontal ±60° (released ±360°), Vertical +25° to +90° (released -30° to +90°)
  • Paint finish Iron shimmer dark grey (similar to RAL 7011)
  • It can be used permanently mounted as a roof monitor or in the portable design for mobile applications.
  • The continuously adjustable hand lever, as well as the simple push-in connection, which connects the basic unit and the base frame are designed for simple handling.
  • Both the basic unit and the base frame can be folded up with one hand for saving space.

 

Portable Water Foam Fire Monitor
Portable Water Foam Fire Monitor

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.85 KB]